Pale, cool loveliness... the cream of your dreams! Light, neutral, captivating.

Soft-satin sheen
For interior woodwork, radiators and furniture
Self-priming formula
High scuff resistance
UKCA and EN71-3 certification
Water based with low VOCs
Colour also available as:
Matte Chalk Wall Paint range
Weatherproof Al Fresco inside/outside range

General

Water based
Suitable for interior use only
Chalk and mineral paint formulated for trims, skirting, doors etc. Also suitable for other interior woodwork, powder coated radiators, and all sorts of furniture including laminate
UKCA and EN71-3 certified (safe for use on children’s toys) EN71-3:2019+A1:2021
Ingredients: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative
Low VOC content and low odour
Finish – soft satin sheen
Self-sealing - does not require a top coat
Self-priming – no primer or undercoat required for any surface except bare metal (in which case use a suitable metal primer)
Coverage

A 500ml tin will provide a coat of up to 7m2. For a durable finish, a minimum of 2 coats is required, so your 500ml tin should provide full coverage for 3.5m2 on non-porous surfaces like laminate or metal.
Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting.
Porous, or ‘thirsty’, surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 500ml tin will provide less than 3.5m2 of full coverage. If you apply the paint too thinly, durability may be affected.
Preparation

Ensure surfaces are in suitable condition for painting - clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint.
Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! For a great demonstration, see our video.
Take care on opening the tin lid – a Frenchic tin opener is recommended
Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use
Application, drying and curing (hardening)

Apply with a good quality brush or roller
To allow self-levelling, avoid overworking the paint
Allow a minimum of 4 hours between coats (even if the paint feels touch dry)
Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete
Clean up and storage

Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.
Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.
Advice for choosing colours

We make every effort to match our online colour swatches to the paint but colours can vary depending on a number of factors, including screen settings. This means that we cannot guarantee the paint will exactly match what you see on screen. Please order a colour chart, small tin or sample sachet (where available) or visit your nearest stockist to see the colours yourself.

Please contact us before placing any order for Frenchic ®. 

We can ship using APC liquid service - please choose our 'Liquid' shipping service at check out. 

Any orders that have to be cancelled will incur a charge due to payment providers charging us for the transaction.

*https://www.clockshomeandgarden.com/service/shipping-returns/